zBoost DataBlast™ for Data on the Verizon LTE & AWS Network
• Coverage up to 2500 sq. ft.

The zBoost SOHO DataBlast phone signal booster speeds 4G data on the Verizon LTE & AWS networks, extending a 4G Cell Zone™ indoors for multiple devices and covering up to 2500 square feet. It is simple to set up and includes everything you need, making it perfect for the home or office.

Benefits Include:

  • Increases indoor 4G data speeds on Verizon LTE & AWS networks
  • Coverage up to 2500 square feet
  • Supports multiple users simultaneously
  • Improves upload and download speeds
  • Easy to set up – comes complete with everything you need
  • No cradle or connections to your phone
  • Extends phone battery life (uses less power when signal is stronger)
  • Protects the carrier network using patented technology

Setup overview:

The package includes everything you need: base unit, base unit antenna, power supply, low-loss SATV coaxial cable RG-59 (mini), signal antenna and mounting hardware. The omni-directional signal antenna receives signals from multiple cell towers.


FIRST: Choose a location for the Signal Antenna using your cell phone to determine the area of strongest signal.

Choose a location for the Signal Antenna using your cell phone to determine the area of strongest signal. The coverage your zBoost provides is largely determined by the quality of signal received by the Signal Antenna.
To maximize signal coverage, place the Signal Antenna where you find the strongest signal (up high or outside) and at least 3 feet above any metal. Keep in mind that if your best signal is one bar, your coverage will be limited to one small room.

Also keep in mind that, for optimum performance, the Signal Antenna must be placed at least 15 vertical feet above the zBoost Base Unit.

SECOND: Place the zBoost Base Unit where you want to create a Cell Zone™.

Connect the Base Unit Antenna to the Base Unit and place it where you need signal. For the widest possible signal area, it is recommended that you position the Base Unit near the middle of a room or mount it on an interior wall. This Base Unit uses an omni-directional antenna that delivers signal in a circular pattern around the antenna.

Keep the Base Unit off the floor and at least 2 feet away from other cords, metal objects or other wireless devices such as wireless routers or wireless access points. The zBoost SOHO performs best when there are no obstructions between the zBoost Base Unit and your mobile device.

THIRD: Run the provided coaxial cable between the Base Unit and Signal Antenna.

Use the provided 50 feet of RG-59(mini) coaxial cable to connect the Signal Antenna and the Base Unit. Should you need additional cable length, 15 foot extensions (Part #: YX030-15w) are available. Please note: Cable longer than 75 feet is not recommended.

FOURTH: Connect the zBoost Base Unit to the provided power supply and plug into a power outlet.

When your zBoost system is in place and fully connected, walk throughout your home or office and verify that you are able to reliably place calls. If the signal strength has improved, your zBoost is working. Remember, coverage varies based on outdoor signal level, building construction, and antenna placement. Coverage in adjoining rooms will be reduced by walls and building materials.

Upon initial power up, a solid GREEN LED should appear indicating normal conditions. If a RED light appears, adjustments may be needed to optimize performance. If you find the increased signal coverage is acceptable, however, no additional adjustments are needed. See LED Indicator section for more information.

Should you desire to improve coverage, you may:

  • Relocate the Signal Antenna in order to capture a better signal –higher is usually better
  • Increase the distance between the Base Unit Antenna and the Signal Antenna
  • Purchase an upgrade antenna

LED Base Unit Indicators

For zBoost SOHO, Metro and Commercial Models

At Initial Power Up Only


Normal condition at power up.

Slowly Alternating RED and GREEN

zBoost is working, but at reduced performance and coverage due to “non-ideal” setup.

Solution: Increase the distance between Signal Antennas and Base Unit Antenna to  achieve maximum performance and coverage.

Fast Flashing RED

Indicates insufficient distance between the Signal Antennas and the Base Unit Antenna. The amplifier is operating at significantly reduced coverage.

Solution: Increase distance between Base Unit Antenna and Signal Antennas.

 Solid RED

System is receiving signal from either the mobile device or the base station transceiver that is too strong for proper operation.

Solutions: (1) Move away from receiving antenna with your cell phone. (2) Move antenna away from other devices.

Fast Alternating RED and GREEN followed by no light

The amplifier is disabled.

Solution: Unplug and start over.

 After Initial Power Up


Normal condition.

Blinking GREEN

Inconsistent power source – power supply may need to be replaced. Contact technical support.

Solid RED

System is receiving signals from either the mobile device or the base station transceiver which are too strong for proper operation.

Solution: Please unplug your system. Re-orient your Signal Antenna and/or Base Unit Antenna to reduce the excessive signal source. Plug your system back in. If still solid red, call customer support 1-800-871-1612.

Package Contents

Base Unit with Base Unit Antenna

Power Supply

Signal Antenna

Signal Antenna Mounting Hardware

Coaxial Cable

Availability: In stock