zBoost REACH dual band cell phone signal booster covers up to 3,500 sq. ft.

The new and improved ZB560P is the replacement for the YX560P

The zBoost REACH provides increased in-building voice and data coverage and better reach into rural environments by using a directional External Antenna which is aimed at the nearest network tower. The ZB560P boosts cell phone signals for voice calls and text for all major carriers. The zBoost REACH captures the marginal to reliable cellular signal you have outdoors and rebroadcasts it indoors, up to 3,500 square feet, so you can enjoy clearer, faster service without interruption.

The ZB560P is backed by a 2 year Manufacturer’s Warranty Replacement and ships complete: amplifier base unit, indoor antenna, power supply, 50 ft. of RG6 cable, external panel antenna, and mounting hardware.

Benefits Include:

  • High performing dual band signal booster – coverage up to 3,500 sq. ft. (up to 73 dB system gain)
  • Ideal for residential use with marginal to reliable outside signal
  • Reduces dropped and missed calls and can provide faster 3G data performance for multiple simultaneous users
  • Boosts performance on iPhone™, Samsung™, Android and other phones and mobile devices
  • Automatically operates at maximum gain – no manual adjustments needed
  • Extends phone battery life - phone uses less power when the indoor signal is stronger
  • Easy to set up - all hardware included
  • Designed in Silicon Valley – Made in North America



Setup overview:

The package includes everything you need: Base Unit, Indoor Antenna, power supply, coaxial cable RG-6 (50 feet), directional External Antenna and mounting hardware.

 zBoost ZB560P Signal Extender Setup Illustration Image

Before installing, please note the following important factors in determining your zBoost performance:

    • At least 15 vertical feet is needed between the External Antenna (receives the outside signal) and the Indoor Antenna (rebroadcasts the signal indoors). Separation less than 15 vertical feet will result in decreased performance. See illustration below.
    • Keep the External Antenna at least 3 feet above any metal.

FIRST: Choose a location for the External Antenna

Choosing the best location for installation of the External Antenna provides the best performance and the largest area of improved signal. Determine the location which provides the strongest signal using the signal strength indicator on your cell phone. The location will also need to provide 15 feet of vertical separation between the External Antenna and the planned location of the Indoor Antenna. Typically, the best location for the External Antenna is found on the roof.

The YX699 Signal Meter (available separately) provides signal strength information. It can be used with its supplied whip antenna to find the best location for antenna mounting with the strongest received signal. It can also be connected to the directional antennas to aim the antennas for maximum received signal.

Caution: Avoid placing antenna near metal such as wiring, A/C ducts, truss plates, etc. When attaching the cable to the antenna, run the cable away from the antenna. Avoid draping the coax near the antenna.

To get the maximum benefit, you will want to take special care in pointing the External Antenna in the direction of best signal for your wireless service provider. See the User Manual for Antenna Aiming Instructions or refer to our Install Tips page. Once you have determined the optimum location and angle, secure the antenna to a pole (not provided) or flat surface using the provided antenna hardware.

SECOND: Place the zBoost Base Unit where you want to create a Cell Zone

Connect the Indoor Antenna to the Base Unit and place it where you need signal. For the widest possible signal area, position the Base Unit near the middle of a room. You may also mount it on an interior wall by first removing the silver bracket, screwing the bracket to a wall (screws not provided) then snapping the Base Unit back in place keeping the Indoor Antenna vertical. This Base Unit uses an omni-directional antenna that delivers signal in a circular pattern around the antenna.

Keep the Base Unit off the floor and at least 2 feet away from other cords, metal objects or other wireless devices such as wireless routers or wireless access points. The zBoost REACH performs best when there are no obstructions between the zBoost Base Unit and your mobile device.

Remember, the zBoost REACH requires at least 15 feet of vertical separation between the Base Unit and the External Antenna. Generally, increasing this distance (up to 40 feet) will increase the performance and decreasing the distance will limit zBoost performance.

THIRD: Run the provided coaxial cable between the Base Unit and External Antenna

Use the provided 50 feet of RG-6 coaxial cable to connect the External Antenna and the Base Unit. To run the cable from exterior to interior through a window, an 8 inch window-entry cable is available for purchase (Part: YX030-08W). Should you need additional cable length, 15 foot extensions (Part: YX030-15W) are available. Please note: Cable longer than 65 feet is not recommended.

FOURTH: Connect the zBoost Base Unit to the provided power supply and plug into a power outlet

When your zBoost system is in place and fully connected, walk throughout your home and verify that you are able to reliably place calls. If the signal strength has improved, your zBoost is working.

Remember, coverage varies based on outdoor signal level, building construction, and antenna placement. Coverage in adjoining rooms will be reduced by walls and building materials.

Improving Your Coverage Area

Remember, coverage varies based on outdoor signal level, building construction, and antenna placement. Coverage in adjoining rooms will be reduced by walls and building materials.

Should you desire to improve coverage, you may:

  • Relocate the External Antenna to capture a better signal – higher is better.
  • Increase the distance between the Indoor Antenna and the External Antenna.
  • Purchase an upgrade antenna

Upon initial power up, the LED will cycle RED, GREEN and ORANGE for 30 seconds. After, a series of GREEN flashes will indicate the quality of your setup. Following this, a solid GREEN light indicates normal conditions. If it is not solid GREEN, follow the instructions in the Base Unit LED Indicators section in the user manual. Adjustments may be needed to optimize performance. If you find the increased signal coverage is acceptable, however, no additional adjustments are needed.
See the Base Unit LED Indicators section on our Install Tips page for more information.


Package Contents

Base Unit

Indoor Antenna

Power Supply

Coaxial Cable (RG-6, 50 ft.)

External Antenna & Mounting Hardware

Product Specifications: REACH ZB560P



1850 to 1990 MHz

System Gain

73 dB

PCS Bands Supported

A, D, B, E, F, C





824 to 894 MHz

System Gain

66 dB

Cellular Bands Supported

A, B, A’, B’




 Power Consumption

3W standby; 7W max signal - 2.0A Max

 Wall Supply Input; Voltage

100-240VAC 50-60 Hz; 5.0VDC

 System Certifications

FCC Parts 15 & 20, Industry Canada

 Base Unit Size and Weight

5” x 7” x 1.25” – 9 oz.

 Operating Conditions

Indoor Use Only (40°- 105° F)

 Coverage (Open Areas)

Up to 3,500 sq. ft.


This is a CONSUMER Device.  
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. AT&T, Sprint, T-Mobile, Verizon and 90 additional carriers have already given consent for all consumers to use this device. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
FCC contact information: www.fcc.gov/signal-boosters/registration

Out of Stock